Contact Us
Tel: +86-571-82333345
Fax: +86-571-82307666
Add: Wangjia Industrial Zone, Wenyan Town, Xiaoshan District ,Hangzhou City, Zhejiang Province, China 311258
Home > News > Content

Chain Maintenance

Hangzhou Qirui Tools Co.,Ltd | Updated: Jul 16, 2016

1, chain tension should be fit, too tight will increase power consumption, bearing wear and sprocket easy beat and take off chain is too loose. Chain tension: from the middle of the sprocket or is under pressure, about two wheel centre distance 2%-3%.

2, chain wheel mounted on the shaft should not swing and grimace. In the same transmission component two sprocket face should be on the same plane, chain Center distance 0.5 m when the deviation of 1 mm; chain Center distance 0.5 m when error is 2 mm. But there can be no friction the sprocket side phenomenon, if two-wheel offset is too prone to cast off and accelerated wear. When replacing the sprocket must be taken to check and adjust the offset.

After 3, sprocket wear, should replace the new sprocket and sprocket, to ensure good contact. Cannot be replaced separately new sprocket or sprockets. Will cause meshing well to accelerate new sprockets or sprocket wear. Sprocket tooth wear to a certain extent in time after turning it over and use the (adjustable surface using chain), to extend the time.

4, after use, the new chain is too long or stretched, it is difficult to adjust, it removed the link, but it must be an even number. Back through the chain from the sprocket lock plates on the outside, lock opening should rotate in the opposite direction.

5, sprocket should be lubricated at work. Lubricant must enter the clearance of roller and sleeve, to improve working conditions, reducing wear.

6 and older cannot be used with some new sprocket on sprocket, or easy to impact in the transmission, pull off gear wheels.

Contact Us
Hangzhou Qirui Tools Co.,Ltd
Tel: +86-571-82333345
Address: Wangjia Industrial Zone, Wenyan Town, Xiaoshan District ,Hangzhou City, Zhejiang Province, China 311258
Sign Up For Exclusive Updates
Get the latest special offers and discount information sent to your email address.
Copyright © Hangzhou Qirui Tools Co.,Ltd All rights reserved.